Which is better for US app teams in 2027, AppsFlyer or Adjust? Neither wins outright. Both are mobile measurement partners that attribute installs, support Apple's SKAdNetwork and sell fraud protection, so the better pick depends on your ad network mix and event volume, and on the quote you get.
Here is the catch. On iOS, SKAdNetwork 4 reports an install through up to three postbacks, and only the first can carry a fine-grained conversion value, a number from 0 to 63 (Apple Developer, 2026). Every attribution vendor gets that same thin signal from Apple. The real differences sit in fraud tools, partner integrations, reporting, support and price. This guide shows how to compare them, where the other three big vendors fit, and what to avoid when you sign.
Key Takeaways
- SKAdNetwork 4 allows up to 3 postbacks per install, and only the first carries a fine value from 0 to 63 (Apple Developer, 2026). Your conversion value schema matters more than your logo choice.
- The postback windows run 0 to 2 days, 3 to 7 days and 8 to 35 days (Apple Developer, 2026). Judging a campaign on day 1 data misses most of the signal.
- AppsFlyer and Adjust each sell a dedicated fraud product (AppsFlyer Protect360, 2026; Adjust Fraud Prevention Suite, 2026). Ask both to prove it on your own traffic.
- Most MMP pricing is quote-based. Get at least two written quotes at your real volume before you decide.
What is the real difference between AppsFlyer and Adjust?
The real difference is not the core job, because both tools do it. A mobile measurement partner (MMP) is a neutral third party that matches installs and in-app events to the ad that caused them, then reports to you and to your ad networks. AppsFlyer and Adjust both do this on iOS and Android. They differ in ownership, product breadth, fraud tooling and how each vendor packages and prices its plans.
Ownership. Adjust is owned by AppLovin, which also runs an ad network. AppsFlyer is an independent company. Some buyers care about that, some do not. If you do, ask each vendor in writing how it separates measurement data from any advertising business.
Fraud tools. AppsFlyer sells Protect360, and Adjust sells its Fraud Prevention Suite. The marketing pages read alike. Ask each vendor to run a test on one of your past campaigns and show what it would have blocked.
What iOS actually gives you. Since iOS 14.5, apps must show the App Tracking Transparency prompt before tracking users across other companies' apps and sites (Apple Developer, 2026). Users who decline can only be measured through SKAdNetwork, with those three delayed postbacks. Neither vendor can get around that rule. What they can do is help you map events to the 64 possible values and model the rest.
An example from our own work. In the LunarLinc friendship app campaign (Android, India first), Meta app campaigns delivered 41,420 installs. The 113 video ads drove 41,420 installs, against 468 from 83 image ads (LunarLinc case study). You only see a gap like that if your attribution reports at creative level. That is the test for any MMP: can it show you which ad, not just which network, produced the install?
How do you choose between AppsFlyer and Adjust?
Choose by running the same short test with both vendors, not by reading feature lists. Feature pages overlap almost completely, so the decision comes from your ad network mix, your event design and the written quote. Follow these steps in order.
- List every channel you buy or plan to buy. Include Meta, Google, TikTok, Apple Search Ads and any ad network. Ask each vendor to confirm in writing that each one has a live integration.
- Write your event schema first. Define the five or six events that predict revenue or retention (registration, first purchase, day 7 return). Both tools can track them, but a messy schema ruins reports in either.
- Design your SKAN conversion value map. You have 64 fine values for the first postback only, so decide which behavior each value stands for. Ask each vendor how its tools help you build and change this map.
- Request quotes at your real volume. Give both vendors the same number of monthly attributed installs and events. Pricing is quote-based, so compare the written totals, plus what happens when you go over.
- Run a fraud test. Hand over a past campaign and ask what each fraud product would have flagged and why.
- Check data export and contract terms. You want raw data in your own warehouse, a clear notice period and no penalty for exporting history.
If you buy traffic on several channels, the measurement choice should sit inside a wider plan. Our app marketing services and user acquisition work start from the question "what do we need to measure to decide where to put the next dollar?" and pick tools after that.
For illustration: imagine an app that spends on Meta and Google and buys about 100,000 installs a month. It asks both vendors for a quote, and one comes in noticeably lower but charges extra for fraud filtering. The cheaper headline price may not be the cheaper bill. That is why step 4 asks for the total, not the rate card.
MMP comparison: AppsFlyer, Adjust, Branch, Singular and Kochava
All five major vendors support SKAdNetwork and sell some form of fraud protection, so the useful comparison is how they price and what they bundle. SKAdNetwork (SKAN) is Apple's privacy-focused system for measuring installs without user-level identifiers. Apple's documentation describes the same mechanics for every vendor.
| MMP | Pricing model | SKAN support | Fraud tools |
|---|---|---|---|
| AppsFlyer | Volume-based; on request | Yes | Protect360 |
| Adjust | Volume-based; on request | Yes | Fraud Prevention Suite |
| Branch | On request | Yes | Fraud detection features; confirm scope in a demo |
| Singular | On request | Yes | Fraud prevention module; confirm scope in a demo |
| Kochava | Free entry tier offered; paid plans on request | Yes | Fraud tooling; confirm scope in a demo |
We list pricing only where a vendor publishes it, and otherwise say "on request," because quotes change with volume and contract. Check each vendor's site before you budget.
Three facts from Apple's documentation shape every comparison above:
- The first postback can carry a fine conversion value from 0 to 63, which is 64 possible states (Apple Developer, 2026).
- Postbacks arrive in three windows: 0 to 2 days, 3 to 7 days and 8 to 35 days (Apple Developer, 2026). Late windows return coarse values only.
- Apple's tracking prompt applies to every app, whichever MMP you use (Apple Developer, 2026).
On Android, attribution leans on Google's Install Referrer API, which all of these vendors read (Android Developers, 2026). So Android reports are usually closer between vendors than iOS reports. If two MMPs give you very different Android numbers, suspect your setup before the tool.
What mistakes do app teams make when picking an MMP?
The costliest mistake is treating the MMP as a plug-in that works the day you install it. It reports whatever events you send, so poor event design gives you poor answers on any platform. Here are the errors we see most.
1. Choosing on logo or price alone. A low rate can hide fees for fraud filtering, extra events or raw data export. Compare total cost at your volume.
2. Reporting by network, not by creative. The LunarLinc numbers above show why. Had the team looked only at "Meta" as one block, the 113 video ads that drove 41,420 installs and the 83 image ads that drove 468 would have blended into one average (LunarLinc case study). Insist on creative and ad set level reporting.
3. Stopping at the install. Installs are cheap to count and easy to inflate. The EarningsCall fintech app (US, for investors) saw 60% of downloads stay monthly active in its 2022 to 2023 campaign, which meant 3K+ MAU on 5K+ downloads (EarningsCall case study). You can only claim that if post-install events are tracked and tied back to the source.
4. Ignoring the SKAN value map. Many teams accept a default and never revisit it. If your 64 values do not separate buyers from browsers, iOS campaigns look the same whether they work or not.
5. Judging iOS on day 1. The later postback windows run out to day 35 (Apple Developer, 2026), so early cuts can kill campaigns that would have paid back.
6. Switching vendors mid-quarter. A new MMP means a new baseline. Imagine you swap tools in month three of a launch: you can no longer tell whether cost per install rose because of the campaign or the new counting. Switch at a planned break, and run both tools in parallel for a few weeks.
Measurement mistakes often start earlier, in the store listing. If your page converts poorly, even perfect attribution just tells you precisely how much money you wasted. Our ASO services fix that side of the funnel.
How ApsteQ approaches this
ApsteQ treats the MMP as part of the growth plan, not a separate purchase. We have worked on 300+ apps and brands since 2015, and the team behind this work includes founder Arsh Singh, who has 20+ years in growth marketing, plus 40+ specialists. Across that work we have driven 52M+ installs and managed $2.5M+ in ad spend.
In practice, that means we ask four questions before we recommend a tool: which channels will carry the budget, which in-app events predict revenue, how the SKAN value map will be built, and what the vendor will cost at twice today's volume. We are vendor-agnostic on measurement. The right MMP is the one your team will actually keep clean. If you want a second opinion on your current setup, our user acquisition team can review it, and you can start with a free app audit.
What will change for MMPs in 2026 and 2027?
Expect measurement to rely more on Apple's newer attribution API, on modeled data and on AI-assisted reporting, with less user-level detail overall. The single biggest item to track is AdAttributionKit, Apple's newer attribution API that supports re-engagement measurement alongside install measurement (Apple Developer, 2026). It sits beside SKAdNetwork, so MMPs now maintain two Apple paths, and your vendor's pace in supporting it is worth asking about.
Three things to put on your 2027 checklist:
- Ask for the AdAttributionKit roadmap in writing. A vendor that cannot give dates today may lag when your networks switch.
- Plan for modeled numbers. With a 3-postback, 35-day structure on iOS (Apple Developer, 2026), more reporting will be estimates. Compare vendors on how they explain their models.
- Keep your own source of truth. Store raw events in your warehouse so you can re-check any vendor's math or change vendors without losing history.
Automation will matter too. Alerts for spend spikes, fraud flags and cohort drops can be wired to your MMP data with AI automation so a person sees problems the same day, not at the monthly review.
Frequently Asked Questions
Is AppsFlyer better than Adjust?
Neither is better for every app. Both attribute iOS and Android installs, support SKAdNetwork and sell fraud protection. Decide using written quotes at your real volume, a live fraud test on a past campaign and a check that your ad networks are integrated. Teams with simple channel mixes often find the price gap is the deciding factor.
How much do AppsFlyer and Adjust cost?
Both price by quote, usually tied to your attributed install and event volume, so we do not publish a figure. Request written quotes from each at the same volume, such as 100,000 installs a month, and ask what fraud filtering, raw data export and extra events add. Compare the full annual total, not the headline rate.
Do I need an MMP if I only run Apple Search Ads?
Not always. Apple provides its own attribution for Apple Search Ads. But once you add a second paid channel, such as Meta or Google, you need one neutral system to compare them. An MMP also tracks post-install events by source, which matters when you judge quality. Our user acquisition team can advise on timing.
What is a SKAN conversion value?
A SKAN conversion value is a number from 0 to 63 that your app sets after install to signal user behavior, such as a purchase. In SKAdNetwork 4 only the first of up to three postbacks carries this fine value, and later ones return coarse low, medium or high values (Apple Developer, 2026).
Can I switch MMPs later?
Yes, but plan it. Run both vendors in parallel for several weeks so you can compare counts and set a new baseline. Export your raw event history first and check your contract's notice period. Switching mid-campaign makes cost per install look different for reasons unrelated to ad performance, so pick a quiet period.
Conclusion
AppsFlyer and Adjust are close on core features, so your decision should come from evidence you gather yourself.
- Both support SKAN 4, which gives you 3 postbacks and a fine value of 0 to 63 (Apple Developer, 2026).
- Test fraud tools on your own past traffic, not on a demo deck.
- Compare written quotes at your real volume; most pricing is on request.
- Design your event schema and SKAN value map before you sign.
- Ask each vendor for its AdAttributionKit plan and keep raw data in your own warehouse.
Want a second pair of eyes on your measurement setup? Start with a free app audit, or book a free strategy call and we will map your channels, events and tool choice together.
Free, 2 minutes
What is actually holding your app back?
Answer a few questions about your app and get your App Growth Score out of 100, the 3 problems costing you downloads and revenue, and the fix for each one.
Get your App Growth ScoreRather talk it through? Book a strategy call · Free guide: 7 Expensive Mistakes That Kill App Launches